Microneedling Needle Comparison: Hypodermic vs. Crystal Multi Needle vs. Nanosoft Needle

Microneedling Needle Comparison: Hypodermic vs. Crystal Multi Needle vs. Nanosoft Needle

Needle selection is where a professional protocol is actually decided. The device determines how you apply, but the needle determines what reaches the skin — single-point precision or multi-point coverage, standard gauge or ultra-fine, one-time sterile use or screw-mounted multi-pin arrays.

This guide compares the three needle categories we offer — hypodermic needles, Crystal Multi Needle, and Nanosoft Needle — and then goes one level deeper into the choices inside each category: Crystal 5 Pin vs 9 Pin, and Nanosoft 3 Pin vs 4 Pin.

Key Takeaways — Which needle for which job?

  • Hypodermic Needles → single, sterile, individual needles for classic injection work; the reference standard for gauge-based selection.
  • Crystal Multi Needle → multi-pin arrays that deliver more coverage per application; 5 Pin for skinbooster work, 9 Pin for denser filler-type applications.
  • Nanosoft Needle → the ultra-fine option; 3 Pin for the smallest, most comfort-focused application, 4 Pin for a medical-grade balance of fineness and coverage.
  • All three are professional injection needles. They are used with meso injectors or syringes and belong in trained professional environments — not home kits.

If you are new to needle basics, our Microneedling Needle Guide explains the full taxonomy first.


1. Usage Levels: All Three Are Professional-Grade Injection Needles

Unlike devices — where the spectrum runs from home rollers to clinic injectors — the three needle categories here sit on the same side of the line: they are all injection-type needles for professional use.

Needle Usage Level Connection Primary Environment Typical Procedures
Hypodermic Needle Professional Syringe or injector Clinics, medical aesthetics studios Skinbooster injection, mesotherapy, general solution delivery
Crystal Multi Needle Professional Screw-mounted to meso injector Clinics, medical aesthetics studios Skinbooster injection, filler-type application, hydrolifting
Nanosoft Needle Professional Screw-mounted to meso injector Clinics, medical aesthetics studios Fine, comfort-focused injection; delicate areas

What differentiates them is not usage level but application geometry: one needle at a time, or many needles working together — and how fine those needles are. The decision between them is made on coverage, density, and comfort, not on "professional vs home."


2. How Each Needle Type Works

Hypodermic Needles — The Single-Point Reference

A hypodermic needle is a single sterile needle with a hub for attaching to a syringe or injector. Each application is one controlled injection point, which gives the practitioner complete control over placement, depth, and volume per point.

Our hypodermic needles are individually packed and sterile — the packing model matters in professional environments, because it allows one needle per client with no cross-use risk. Gauge (needle diameter) is the primary selection variable: a thinner needle (higher gauge number) creates a smaller entry point and is generally more comfortable, while a thicker needle supports more viscous solutions. Hypodermic needles are the reference category for gauge-based selection because every other needle system is described relative to single-needle geometry.

Crystal Multi Needle — Coverage Through Multi-Pin Arrays

A Crystal Multi Needle replaces the single needle with an array of pins arranged in a circle, mounted to a meso injector via a screw connection. Instead of one injection point per application, the device delivers several points simultaneously — which changes the economics of a session: more coverage per pass, fewer movements, and more uniform distribution of the solution.

The Crystal Multi Needle 5 Pin is the balanced option, designed around skinbooster application. The 9 Pin Screw Multi Needle increases the pin count for denser application — more points per contact, which suits filler-type and higher-volume work. The trade-off is always the same: more pins = more coverage per application, but a larger contact footprint and a less forgiving technique.

Nanosoft Needle — Fineness as the Design Principle

Nanosoft needles are the fine-needle end of the multi-pin family. They keep the multi-pin geometry but use finer pins designed around comfort and delicate application.

The Nanosoft 3 Pin is the smallest needle in the range — its positioning is built around painless injection, which makes it the choice for pain-sensitive clients and fine areas. The Nanosoft 4 Pin adds a fourth pin for slightly more coverage while remaining medical-grade fine. Where Crystal Multi Needles optimize for coverage and density, Nanosoft needles optimize for fineness and gentleness.


3. Head-to-Head: Hypodermic vs. Crystal Multi Needle vs. Nanosoft

Parameter Hypodermic Needle Crystal Multi Needle Nanosoft Needle
Needle geometry Single needle Multi-pin array (5 / 9 Pin) Multi-pin array, finer (3 / 4 Pin)
Packing Sterile, individual Screw-mounted set Screw-mounted set
Application style One controlled point per application Several points per application Several fine points per application
Coverage per pass Lowest High Moderate
Contact footprint Smallest Largest Medium
Comfort positioning Gauge-dependent Standard Highest (fineness-first)
Typical solutions Broad (gauge-dependent) Skinbooster, filler-type Fine, delicate applications
Device pairing Syringe or meso injector Meso injector Meso injector
Usage level Professional Professional Professional

Based on published manufacturer specifications of products in our catalog; verify the specific model's specifications on its product page.


4. Inside the Categories: The Sub-Comparisons

4.1 Crystal Multi Needle: 5 Pin vs. 9 Pin

Parameter 5 Pin 9 Pin
Pin count 5 9
Coverage per contact Balanced Denser
Typical application Skinbooster injection Filler-type application, higher-volume work
Contact footprint Smaller Larger
Best fit Standard skinbooster protocols Protocols that need more points per pass
Price $59.00 $65.00

How to choose between them. Start from the solution and the target area. If the protocol is standard skinbooster application across moderate areas, the 5 Pin keeps the contact footprint manageable and the technique forgiving. If the protocol is denser — filler-type application or areas that benefit from more points per pass — the 9 Pin delivers that density directly, at the cost of a larger footprint and a stricter placement discipline.

4.2 Nanosoft Needle: 3 Pin vs. 4 Pin

Parameter 3 Pin 4 Pin
Pin count 3 4
Positioning Smallest needle, painless-injection focus Medical-grade fine
Fineness Highest High
Coverage per contact Lowest of the multi-pin family Slightly more than 3 Pin
Best fit Pain-sensitive clients, fine areas, first sessions Fine work needing a touch more coverage

How to choose between them. The 3 Pin is the gentlest entry point in the entire range — the smallest needle in the family, positioned for pain-sensitive clients and delicate zones. The 4 Pin trades a fraction of that fineness for one more point of coverage while staying medical-grade. If comfort is the priority, 3 Pin; if you want the same fineness philosophy with slightly more throughput, 4 Pin.


5. Which Needle for Which Procedure

Procedure Recommended needle Why
Skinbooster injection (standard) Crystal 5 Pin Balanced coverage, forgiving technique
Denser / filler-type application Crystal 9 Pin More points per pass
Pain-sensitive clients / fine areas Nanosoft 3 Pin Smallest needle, comfort-first
Fine work needing more coverage Nanosoft 4 Pin Medical-grade fine + extra point
Classic single-point injection Hypodermic needles Full control per point, gauge-based
Solution delivery with reduced puncture risk Blunt cannulas Alternative to sharp needles for delivery work

These needle systems pair with the professional devices in our Meso Injector collection — the device–needle selection tool maps each device to its compatible needle family. For a full equipment view, our complete microneedling setup guide places these needles into complete kits.


Frequently Asked Questions

Which needles are for home use, and which are for professional use?

All three categories in this guide — hypodermic needles, Crystal Multi Needle, and Nanosoft needles — are professional injection needles. They deliver solution into the skin and should be used by trained practitioners in appropriate environments.

What is the difference between a hypodermic needle and a multi-pin needle?

A hypodermic needle applies one injection point at a time with full placement control; a multi-pin needle (Crystal or Nanosoft) applies several points per contact for more coverage per pass. Choose single-point when control matters most, multi-pin when throughput and uniformity matter more.

Crystal 5 Pin or 9 Pin — how do I decide?

Start from the solution and the area: the 5 Pin suits standard skinbooster protocols with a smaller contact footprint; the 9 Pin delivers denser coverage per pass for filler-type and higher-volume work.

Nanosoft 3 Pin or 4 Pin — how do I decide?

The 3 Pin is the smallest needle in the range — the comfort-first choice for pain-sensitive clients and fine areas. The 4 Pin stays medical-grade fine while adding one more point of coverage.

Are these needles compatible with all meso injectors?

Compatibility depends on the connection type (screw-mounted multi-pin needles vs. hub-style single needles) and the device's accepted needle range. The device–needle selection tool maps each meso injector model to its compatible needle families.

Do I still need pen cartridges if I use these needles?

Yes — they serve different systems. Pen cartridges belong to electric pens for classic microneedling; hypodermic, Crystal, and Nanosoft needles belong to injection procedures. Most professional practices stock both lines. The Microneedling Needle Guide covers the complete taxonomy.


Explore the Needles


Published by Deenora Beauty's Technical Content Team · Updated August 2026. Deenora Beauty products are intended for professional aesthetic use. Needle-based and injection-type procedures should be performed only by trained practitioners following the manufacturer's instructions and applicable hygiene standards. Results depend on protocol, skin condition, and operator technique. Specifications cited in this guide are based on published manufacturer specifications and may vary by model — always verify the specific product's specifications on its product page.